Storage
- The polyester resin stable for 3 months at 25°c in dark place.
- No smoking rules strictly followed.
- In case of fire, use dry chemical foam or water spray to extinguish the place
Packaging
- Resin is packed in HDPE carboys of 35 kgs and barrels of 200 kgs .
Health and safety
- Prevent contamination of accelerator /promoter from material like (iron copper cobalt) salts storing acid & sanding dusts.
- Suggested container are glass polypropylene/ teflon polyethylene or stainless steel to prevent contamination of material during it's handling.
Usage
- To fabricate FRP composite for excellent resistance to a wide variety of corrosive chemicals environments at room and elevated temperatures.
Technical Data Sheet
| Title | Test | Specification |
|---|---|---|
| 1. Appearance | Clear Transparent Liquid | Clear Transparent Liquid |
| 2. Colour | Yellowish Liquid | Yellowish Liquid |
| 3. B4 Cup viscosity@25°c | 95 sec | 90 ± 10 sec |
| 4. Acid value (mgKOH/gm) | 10.69 | 10 ± 5 max |
| 5. Gel TIME @ 25°C (1.5%co3% &1.5%MEKP) | 11:00 min | 12 ± 3 |
| 6. Peak exo°c | 190°c | 190 ± 5°c |
| 7. Time to peak | 15 min | 15 ± 5 min |
| 8. Sp.Gravity | 1.110 | - |
| 9. % Solids | 61.49 % | 61 ± 2 |
| 10. Storage Stability | 3 Months (Below 25°C temp.) |
Technical Data Sheet (Superior)
| Title | Test | Specification |
|---|---|---|
| 1. Appearance | Reddish Brown Low Viscosity Liquid | |
| 2. Viscosity @25°C, cps | 200 - 250 | |
| 3. Specific Gravity @25°c | 1.06 ± 0.01 | |
| 4. Acid value, (mgKOH/gm) | 10 Max | |
| 5. Monomer Content, % | 37 ± 3 | |
| 6. Monomer | Styene | |
| 7. Gel Time @30°C, minutes[1.5% Cil(1%)+1.5% MEKP] | 25 ± 5 | |
| 8. Stability @25°C in darkness | 2 months |
